In the case of barcode printer technology and equipment repair, I always encountered the problem of wrinkling the ribbon of the barcode label printer?
1. Temperature setting is incorrect
2. The paper feed amount is not set correctly
3. Improper print head pressure and balance settings
4. There is dirt in the path of the ribbon
5.The bezel in front of the print head is scratched or dirty.
6. Ribbon does not wrap around the machine properly
Carbon ribbon
Wrinkle solution for ribbon ribbon of barcode printer:
1. Adjust the printing temperature to meet the printing requirements as much as possible
2.Reset the correct amount of paper feed
3. Reset the minimum pressure required for printing
4. Clean the path taken by the ribbon
5. Remove or replace the bezel
6. Reinstall the media correctly
