Zebra barcode printers are favored by users for their outstanding performance and durable quality. Dazhen barcodes will introduce you to the factory restoration and paper testing operations of each model of 7 commonly used zebra barcode printers.
1. Zebra 105SL Zebra Barcode Printer: Turn off, press and hold the three buttons feed, pause and cancel at the same time; turn on, when there is content on the display, let go, the barcode printer will automatically measure the paper.
Restore factory settings: press "SETUP" twice, then press "+""-" to turn the page, find "LOADDEFAULT", then press "SAVE", the barcode printer will automatically feed paper, restore the factory settings, and switch the machine again .
2, ZebraS600 zebra barcode printer restores factory settings: Turn off, press PAUSE and FEED at the same time to turn on, about 3 seconds, press the MODE4 key four times to save the settings, then return to the printing mode, and then turn off the machine.
Detection method: In the case of power on, press and hold the MODE button until the CALIBRATE (paper test indicator) is on, then press the FEED button.
3. Restore factory settings of ZebraZ400 zebra barcode printer: power off, press and hold the FEED+PAUSE key at the same time, release it after about 10 seconds, the printer will automatically restore the factory settings.Paper measurement method: press and hold the CALIBRATE key to turn on, and release CALIBRATE after feeding the paper Press the key, a lot of paper is discharged at this time, after the paper is discharged, turn off the machine and turn it on again, and the paper measurement is completed.
4. ZebraS4M zebra barcode printer test whether the barcode print head is working properly, whether there is a broken needle or whether the pressure on both sides of the print head is balanced: just print a test page to know, the method is to turn off the barcode printer first, and then press the PAUSE button Turn it on, wait about 8 seconds and let go, the barcode printer will automatically print out the paper, and check whether the printed content is intact. Restore factory settings: Turn off the machine, press and hold the paper output button, and turn on the pause button at the same time. After about 8 seconds, let go, the printer will restore the factory settings.
5, Zebra110XiIII zebra barcode printer paper recognition method: first press the pause button, then press CALIBRATE.
6. Zebra 105SE Zebra barcode printer paper testing: In the power-on state, press MODE three times, then press the FEED key, the printer will automatically perform paper testing.
7, ZebraZ4M zebra barcode printer paper test: press and hold the pause button to turn on the machine. Whether the zebra barcode print head is broken: press and hold the pause button for 8 seconds and then release it, the barcode printer will print out a black bar code label paper, check whether there is a white line on the sticker, if there is generally it can be judged as broken If the needle is detected, the printed barcode may not be scanned.
