Epson Dx5 Printhead

  Please turn off the printer's power after entering a print job; otherwise, the mainboard chip may burn. 

Please do not attach ribbon above 10 pieces of A4 paper after loading the print head. 

This will allow the new needle to run in before you add the ribbon. I hope you can operate with caution.

If the old print head was damaged and particularly leaked ink, the mainboard may have burned, 

therefore please address the mainboard issue before changing the print head. 

  Additionally, the original fuze that has the same current value and model can only be used to replace the F1, 

F2 fuze wire on the mainboard. If a fuze with a larger current value and a different model needs to be replaced, 

it is possible for the mainboard and printhead to malfunction.

  It is important to pay close attention when replacing the print head because doing so carelessly can result in 

man-made damage. There is a rule that states the printhead is not covered by warranty and that it is expensive and sensitive, 

so please take care when commissioning the machine.

  To avoid unnecessary costs and difficulties, it is advised that, if you are unfamiliar with the machine, 

you should send the print head to a repair facility or hire professionals to change the nozzle.

Hot Tags: epson dx5 printhead, China, manufacturers, suppliers, factory, buy, wholesale, price, cheap, free sample, made in China