G79057M New Printhead For Zebra Z4M/PLUS Thermal Barcode Label Printer 300dpi
ZEBRA THERMAL PRINTER HEAD
COMPATIBILITY:For ZEBRA Z4M PLUS Printer
RESOLUTION:300dpi
Product Description
300 dpi printhead for the Zebra Z4M and Z4M Plus, model G79057M. The Z4M is a mid-range metal printer that remains common in manufacturing and logistics, and the 300 dpi head is chosen when labels carry more detail than a standard shipping label.
Principal Benefits
Why it matters
300 dpi marking
Dense part numbers and 2D codes stay crisp on component labels at 300 dpi.
Workshop chassis
Built for steady daily use on a bench rather than occasional print jobs.
G79057M match
This is the 300 dpi Z4M element; the 203 dpi assembly carries a different number.
Seats without adjustment
The latch and plug use the original footprint, so no carriage change is required when the old head comes out.
Ribbon choice
A wax-resin grade is offered where fine text must survive handling and abrasion.
About Codewel
About Codewel
A printhead and media supplier
The Z4M generation is still found in workshops where it prints product and carton labels every day. Parts support has thinned out, so we keep the common head references and confirm them from the old unit rather than relying on a model name that covers several build variants.
Why Buy Printhead From Us
What you get
Workshop machine, workshop support
Z4M users often maintain the printer themselves. We explain the latch and connector rather than requiring a service call.
Number taken from the old unit
G79057M is stamped on the head. A photograph is enough if the label has worn away.
Wear from abrasive stock
If the old head lasted less than expected, label abrasiveness and burn setting are the usual causes. We raise both.
Held as a shelf spare
The unit is small enough to keep on site, so a worn head does not stop a batch.
Before you order
Quote the number from the old head and confirm 300 dpi. If the label is worn, a photo of the head in the carriage is enough for us to identify the assembly.
FAQ
What resolution is this printhead?
300 dpi, about 12 dots per millimetre. It is intended for labels with small text or dense codes.
Does it fit both Z4M and Z4M Plus?
It is listed for both, but the assembly should be confirmed against the old head because build variants exist.
Why are there white lines on every label?
That usually indicates damaged elements. Clean the head first; if the lines stay in the same position, replace it.
Can I fit it without a technician?
Yes, if you are familiar with the printer. Power down, release the latch, unplug the connector and transfer the mounting hardware.
Hot Tags: g79057m new printhead for zebra z4m/plus thermal barcode label printer 300dpi, China, manufacturers, suppliers, factory, buy, wholesale, price, cheap, free sample, made in China
You Might Also Like
Send Inquiry