79802M New PrintHead Printhead For Zebra ZM400 Thermal Barcode Printer 600dpi Genuine
79802M New PrintHead Printhead For Zebra ZM400 Thermal Barcode Printer 600dpi Genuine
79802M New PrintHead Printhead For Zebra ZM400 Thermal Barcode Printer 600dpi Genuine
79802M New PrintHead Printhead For Zebra ZM400 Thermal Barcode Printer 600dpi Genuine
79802M New PrintHead Printhead For Zebra ZM400 Thermal Barcode Printer 600dpi Genuine
79802M New PrintHead Printhead For Zebra ZM400 Thermal Barcode Printer 600dpi Genuine
79802M New PrintHead Printhead For Zebra ZM400 Thermal Barcode Printer 600dpi Genuine
ZEBRA THERMAL PRINTER HEAD
COMPATIBILITY:for Zebra ZM400 Printer
RESOLUTION:600dpi
Product Description
600 dpi thermal printhead for the Zebra ZM400, part number 79802M. This is the high-resolution option for the ZM400, used where labels carry very small text, fine barcodes or dense 2D codes. Direct replacement for the original part.
Principal Benefits
Why it matters
600 dpi for very fine detail
About 24 dots per mm, which is what makes sub-millimetre text and dense 2D codes scannable.
Correct part for the 600 dpi ZM400
The ZM400 was also sold at 203 dpi and 300 dpi. The 79802M is the 600 dpi head.
Even heat across the element
At this resolution uneven heating shows immediately, so the element is built for uniform output.
Ribbon pairing advice included
A 600 dpi head needs a ribbon that can hold the detail, and we will tell you which grades actually resolve.
Straight swap in the existing carriage
Same mounting and connector as the original, fitted with the standard procedure.
About Codewel
About Codewel
A printhead and media supplier
High-resolution heads are the ones most often let down by the wrong ribbon, so we treat the two as a pair. Tell us what you are printing and we will specify a ribbon that genuinely resolves at 600 dpi rather than one that merely fits the machine.
Why Buy Printhead From Us
What you get
Ribbon matched to the resolution
A 600 dpi head with a coarse ribbon produces the same output as a cheaper head. We specify the ribbon to suit.
Resolution confirmed before dispatch
We check the machine configuration before shipping, because the 203, 300 and 600 dpi heads for the ZM400 are not interchangeable.
Tested on a printer before packing
Each head is run on compatible equipment, since a resistance reading will not reveal a void.
Genuine and compatible both stocked
Quoted as separate lines so you choose based on the machine and the budget.
Before ordering
Confirm your ZM400 is the 600 dpi version by checking the specification plate or printing a configuration page. Send a photo if the plate is unclear.
FAQ
What dpi is this printhead?
600 dpi (about 24 dots per mm), the high-resolution option for the Zebra ZM400.
Will it fit a 203 dpi ZM400?
No. The ZM400 was sold in 203, 300 and 600 dpi versions with different heads, so check your machine configuration.
Which ribbon should I use with a 600 dpi head?
A resin or fine-detail wax-resin. Standard wax ribbon will not hold 600 dpi definition.
Is 600 dpi necessary for my labels?
Only if you print very small characters or dense 2D codes. For standard shipping labels, 203 or 300 dpi is usually sufficient and cheaper.
Hot Tags: 79802m new printhead printhead for zebra zm400 thermal barcode printer 600dpi genuine, China, manufacturers, suppliers, factory, buy, wholesale, price, cheap, free sample, made in China
You Might Also Like
Send Inquiry