Genuine New Printhead For Zebra 110PAX4 300DPI Left And Right Thermal Printer G57212M
Genuine New Printhead For Zebra 110PAX4 300DPI Left And Right Thermal Printer G57212M
Genuine New Printhead For Zebra 110PAX4 300DPI Left And Right Thermal Printer G57212M
Genuine New Printhead For Zebra 110PAX4 300DPI Left And Right Thermal Printer G57212M
Genuine New Printhead For Zebra 110PAX4 300DPI Left And Right Thermal Printer G5721-2M G57242-2M
ZEBRA THERMAL PRINTER HEAD
COMPATIBILITY:For ZEBRA 110PAX4 Thermal Printers
RESOLUTION:300dpi
P/N:G5721-2M/G57242-2M
Product Description
300 dpi thermal printhead for the Zebra 110PAX4 print engine, available in left-hand and right-hand builds under G5721-2M and G57242-2M. The higher resolution suits small type, serial numbers and 2D codes on labels applied at production speed.
Principal Benefits
Why it matters
300 dpi for small data
Serial plates, date codes and compact 2D symbols stay legible at applicator speeds where 203 dpi would close up the fine strokes.
Both orientations stocked
Left- and right-hand PAX4 engines take mirrored heads. We ship the one your line actually uses.
Stable at line speed
The element array is specified for the short dwell times typical of inline applicators, so density does not fall away as throughput rises.
Direct replacement
Mounting and ribbon connector follow the original, so changeover is a service task rather than a rebuild.
Media unchanged
Works with the resin and wax-resin ribbons already qualified for the PAX4.
About Codewel
About Codewel
A printhead and media supplier
High-resolution print engines are often specified for pharmaceutical and electronics labels, where a missing dot is a rejected batch rather than a cosmetic flaw. We supply PAX4 heads by orientation and resolution, and we keep the 300 dpi variants because they are the ones that stop a validated line.
Why Buy Printhead From Us
What you get
Resolution and orientation checked together
A 300 dpi head in the wrong orientation is an expensive return. We confirm both from the old part number or a photograph.
Assembly references stated plainly
G5721-2M and G57242-2M are the left and right references. We state which one is being quoted rather than leaving it to the invoice.
Tested before it travels
Each head is powered on compatible equipment, then packed in anti-static material inside a rigid carton.
Planned changeovers supported
Order the head with the ribbon and label stock for the same run and it arrives as one shipment.
Before you order
Confirm the engine is a PAX4, note left or right, and quote the number from the old head. If the line is validated, tell us and we will match the exact assembly reference.
FAQ
How many dpi is this head?
300 dpi, about 12 dots per millimetre. It is the resolution used for small text and dense codes on PAX4 engines.
Is G5721-2M left or right?
The two references cover opposite orientations. Because Zebra documentation has used them inconsistently across revisions, we confirm against the old head rather than the listing alone.
Can I use a PAX3 head instead?
No. The PAX3 and PAX4 assemblies differ in mounting and connector, and they are not interchangeable.
How often should the head be cleaned?
Follow the line's maintenance schedule. Adhesive build-up from labels is the usual cause of premature element failure.
Hot Tags: Genuine New Printhead For Zebra 110PAX4 300DPI Left And Right Thermal Printer G5721-2M G57242-2M, China, manufacturers, suppliers, factory, buy, wholesale, price, cheap, free sample, made in China
You Might Also Like
Send Inquiry