ID Card Printhead For Zebra P300 P310C P310i P420 P420i P520i Thermal Bacode Card Printer 105909-112
ID Card Printhead For Zebra P300 P310C P310i P420 P420i P520i Thermal Bacode Card Printer 105909-112
ID Card Printhead For Zebra P300 P310C P310i P420 P420i P520i Thermal Bacode Card Printer 105909-112
ID Card Printhead For Zebra P300 P310C P310i P420 P420i P520i Thermal Bacode Card Printer 105909-112
ZEBRA THERMAL PRINTER HEAD
COMPATIBILITY:For ZEBRA ID-CARD P300 P310C P310i P420 P420i P520i Printer
P/N:105909-112
Product Description
ID card printhead for the Zebra P300, P310C, P310i, P420, P420i and P520i card printers, part 105909-112. Card printers run at 300 dpi and are sensitive to dust and debris, so the head is both a wear part and the component most affected by poor card stock.
Principal Benefits
Why it matters
300 dpi card printing
Portraits, small text and security features on a CR80 card need 300 dpi to stay sharp and consistent.
Covers six card models
One head reference serves the P300 through P520i family, simplifying spares for sites with several issuance desks.
Clean-room sensitive design
The assembly is sealed and packed to arrive free of contamination, which matters because a single dust particle can scratch the element line.
Straightforward replacement
Plug-in connector and original mounting, so an authorised operator can fit it.
Consistent with card stock
Works with the standard PVC and composite cards already in use.
About Codewel
About Codewel
A printhead and media supplier
Card printers are usually part of an issuance process, and a streaked portrait is a rejected card rather than a minor print defect. We supply the head together with guidance on card stock and cleaning, because most premature failures on these machines come from abrasive or dusty cards rather than from the head itself.
Why Buy Printhead From Us
What you get
Card-printer specific
These are not label printheads. We identify the card model and the head reference together, because the assemblies are not shared with label printers.
Dust-controlled packing
The head is bagged and boxed to arrive clean, with the connector protected.
Card stock advice included
If the old head failed early, the cause is often the card stock. We can point to the likely issue before the new head suffers the same fate.
Multiple desks supported
Heads and cleaning supplies can ship together for sites issuing cards at several locations.
Before you order
Confirm the card printer model on its rear plate and quote the old head number. The P300, P420 and P520i families share this reference, but other Zebra card models do not.
FAQ
What resolution is this printhead?
300 dpi, about 12 dots per millimetre. That is the standard resolution for CR80 ID card printing.
Which card printers does it fit?
The Zebra P300, P310C, P310i, P420, P420i and P520i, subject to the head reference on the old unit.
Why are there streaks on the cards?
Usually dust or a scratched element line. Clean the head with an approved card-printer cleaning kit before replacing it.
Can I use any PVC card?
Use cards specified for your printer. Abrasive or warped stock wears the head quickly and can jam the transport.
Hot Tags: id card printhead for zebra p300 p310c p310i p420 p420i p520i thermal bacode card printer 105909-112, China, manufacturers, suppliers, factory, buy, wholesale, price, cheap, free sample, made in China
You Might Also Like
Send Inquiry