Original Printhead For Domino M230I

The coding of many food and beverage goods falls under the category of low-demand applications that may be handled by standard printheads in typical industrial settings.

Stronger ceramic coatings on durable printheads enable printing in more difficult conditions where the ceramic surface is at a high risk of being scratched by dirt, dust, or stones. The printhead would require replacement more frequently if it were a conventional printhead.

In order to increase high resin coding speed in challenging settings without sacrificing quality, premium printheads have recently been introduced. The market's fastest high resin coding is produced by this cutting-edge printhead technology, which deals with temperature changes more effectively and prints at a speed of 600 mm/s.

Note: check other boards & cables for damage before installing any print head. If these other items are damaged, they may damage a new print head. Consult your service manual for further information.

How to extend the life of your print head

You can use a cotton swab soaked in 70% alcohol, first turn off the printer and turn on the print head.

Use a small amount of cotton cloth to brush the mechanical part of the printer, or gently blow away dust (such as: rollers, paper tape sensors, and print heads). Do not use any hard metal or abrasive tools (such as screwdrivers) to grind the contamination of the print head.

Use a cotton swab with alcohol to press it on the print head and wipe it from the bottom to the bottom. Then rotate the roller and wipe it with the roller. Do not use the cotton swab when it is dirty.