Thermal Printhead For Zebra
video

Thermal Printhead For Zebra

Thermal print head, paper width is 58mm7, dot spacing is 0.125mm8, dot size is 0.125mm*0.12mm.
Send Inquiry
Chat Now
Product Introduction

Thermal print head consists of a row of heating element, the element has the same resistance, these components are close together, ranging from 200 dpi to 600 dpi, these components must be in current through will quickly produce high temperature, when the dielectric coating meet these components, temperature within a very short time increases, the dielectric coating chemical reaction occurs, color.

Our Quality Statement

We are dedicated to supply high quality products which meet or exceed the requirements of our customers. As a professional manufacturer of barcode printer, barcode printhead, thermal printer parts, etc, we ensure you that consistently high standards of quality control are applied in our factories.

Thermosensitive printers selectively heat the thermosensitive paper at the specified positions, thus producing the corresponding graphics.The heating is provided by a small electronic heater on the print head in contact with the thermosensitive material.The heater is logically controlled by the printer in the form of square points or strips, which, when driven, produce a figure corresponding to the heating element on the thermosensitive paper.The same logic that controls the heating element also controls the feed, so that graphics can be printed on the entire label or paper.

Working parameters

1.method: heat-sensitive printing of heating row point

2. Effective printing width :48mm

3. Point density (point/mm): horizontal is 8


image003image001

image005

image007

image009

 

  • 100% guarantee quality and long life cycle

  • Quality assurance: Grade A++

  • Test it one by one to make sure the quality before delivery

  • The most competitive price: Original New; Refurbished for fuser unit: more than 95%, removed from the original printer, the high qulaity is close to all new original products; Compatiable for Fuser film sleeve,the price is much lower than original new

  • Type of shipping:EMS,DHL,UPS,by sea ,by air and so on

  • Strong supply ability

  • Good after-sale service.

 

Hot Tags: thermal printhead for zebra, China, manufacturers, suppliers, factory, buy, wholesale, price, cheap, free sample, made in China

Send Inquiry

whatsapp

Phone

E-mail

Inquiry