Roll Slitter Cutting Machine
JUMBLE
Roll width:650~1010mm
Roll diameter:max700mm
Core diameter: 6"
REWINDING
Roll width:150mm
Core diameter:1/2,"1"
SLITTING
Max Speed: 380m/min
Cutting thickness∶ 4~20μm
POWER/AIR
Power:two-phase 220/50~60HZ
Maximum power:7kw
Air pressure: 0.6~0.8mm
APPEARANCE SIZE
Size:2760*2050*1760mm
Only trained individuals are able to operate and maintain this equipment. Each member of the staff who is responsible for machine startup, operation, inspection, fault tracing, and maintenance must thoroughly read and comprehend this chapter. The operator is in charge of ensuring the continued smooth operation of the machine. Report any abnormalities with the machine to the appropriate time personnel. The operator must also ensure that the working area is neat and orderly, with nothing to obscure the view or block the walkway. Do not alter, remove, or stop operating safety facilities without authorization, a machine. lifting or removing the cover to reveal the Serious casualties will result from the operation part. when the participation of unskilled supplementary personnel is essential.
| Points for attention | |
| Jumbo | The unwinding frame moves horizontally, the unwinding film is wound up, and the unwinding film spins. When loading a big volume, press the emergency stop button. |
| Roller | Roll rotation |
| Slitting | Replace the blade, wear the film, adjust the cutter, and disconnect the machine's power source. |
| Roll up | Rotation of the film roll, roll unloading, and roll action |
Installation guidelines of roll slitter cutting machine and handling advice
The distance between the moving sections of roll slitter cutting machine and the area where the operator can move must be at least 500mm. The following conditions must be met by the machine in terms of both power and surroundings:
Maximum machine placement height: 1000 meters above the ground
The ambient temperature of the machine should not exceed 35 °C.
max. +45 °C for the control box
80% is the maximum relative humidity.
: 3P/380V and 2P/220V
Fidelity: 50/60Hz
Control voltage: 220VAC
24VDC solenoid valve and 220VAC
Power: ST580/5kVA/ST680/690/7KAV
It calls for clean, 0.6 MPa compressed air with an hourly gas consumption of about 5 Nm3.
The machine body and its attachments must be stored in a climate-controlled area with temperatures between 5 and 40 °C.
Hot Tags: roll slitter cutting machine, China, manufacturers, suppliers, factory, buy, wholesale, price, cheap, free sample, made in China
You Might Also Like
Send Inquiry