What is the reason for the white paper suddenly appearing in the bar code printer? First, when the machine was just bought back, and second, the machine has been used for a long time. Let ’s take a look at some of the processing methods of multiple blank sheets when printing with a barcode printer for your reference.
First, there is no problem with the general accessories of newly purchased barcode printers. Generally, there may be problems with consumables installation methods and driver installation settings.
1. The barcode label paper is incorrectly installed. Please reinstall the barcode label paper according to the steps in the quick installation guide provided.
2. Driver installation settings: There may also be paper correction and paper size settings, and paper jumping or white paper may appear. You only need to set the three sizes of paper size and print file size on the printer driver and actual label paper size Match, and then correct the paper to solve the problem.
Second, when dealing with problems, you need to consider the above two points and also combine the following points:
1.The position of the paper sensor is incorrect
Raise the print head, and you will see a paper detector where the paper passes through. The detector needs to be covered by the paper, so that the barcode printer can properly fit the size of the paper.
2.Dirty paper sensor
Clean the paper sensor with absolute alcohol and turn off the printer power before cleaning. Repeat the operation of “Paper Calibration”, and press the green key for 3 seconds in the standby mode, and the 3 green indicators will flash at the same time.
3, the gap between the barcode label paper is not standardized
During the processing of some label paper, the size or interval of the label paper produced may be different due to the machine or the mold. As a result, the barcode ribbon printer cannot sense the size of the label paper.
4.The barcode label paper is too thick or the label paper is irregular.
If the backing paper is too thick or the label paper is irregular, the printer cannot detect the paper size.
5.Sensor failure
If none of the previous methods can be solved, there may be a problem with the paper sensor.
The most common solution for paper jumps and blank papers is to correct the paper. The wrong position requires modification of the size settings. The correct operation of the installation consumables is also a key issue. So before using it, you should find more about the barcode printer installation guide It will look better.
